NADCAP CERTIFIED CHEMICAL PROCESSING

AC7108/04 – Solution Analysis and Testing

• AC7108/4 must also be selected.

AC7108/08 – Anodizing (Not for Metal Bond)

• AC7108/8 must also be selected.

AC7108/11 – Conversion Coating

• AC7108/11 must also be selected.

AC7108/12 – Standalone Cleaning, Descaling, Passivation and Electropolishing –

• AC7108/12 must also be selected

General Cleaning and Pre–Cleaning

• Alkaline Cleaning (If Titanium Alkaline Cleaning is also carried out then please check Chemical Cleaning – Titanium Cleaning – Alkaline” also)

• Emulsion Cleaning

• Semi–Aqueous Cleaning

• Solvent Cleaning

Ovens for Thermal Treatments with a set point at or below 250ºF (121ºC) or for Miscellaneous Heating Processes, e.g. Part Drying.

Stripping of Coatings as an Internal Rework Process

• Inorganic Coatings

Solution Analysis (In Support of AC7108)

Testing Performed Internally (In Support of the Chemical Process Accreditation)

B05 – Salt Spray Testing (In Support of Chemical Process Accreditation)

B06 – Water Immersion / Humidity Testing (In Support of AC7108)

B09 – Taber Wear Testing (In Support of AC7108)

B10 – Adhesion Testing (In Support of AC7108)

B13 – Coating Weight Testing(In Support of AC7108)

B 14 – Conductivity Testing (In Support of AC7108)

B15 – Resistivity Testing (In Support of AC7108)

B16 – Coating Thickness Measurement (In Support of AC7108)

B23 – Other Testing (In Support of AC7108)

Anodized Aluminum, Hard Anodize

Anodize Aluminum, Sulfuric Acid

Dye

Seal

Aluminum, Non-Hexavalent Chrome Alternatives

Electropolishing

• Steels

  • ASTM B912

Passivation